杜芳周;高新锋;高富强;

• 1:陕西集华柴家沟矿业有限公司
• 2:煤炭科学研究总院开采设计研究分院

摘要(Abstract)：

详述了国内外锚杆锚固力的试验研究成果,包括:拉拔载荷下锚杆粘锚力的分布规律以及锚杆形状、锚固剂强度和岩体强度对粘锚力的影响;岩体特征、锚固单元特征和加载特征对加锚节理面抗剪性能的影响;锚杆长度、锚杆预紧力、树脂环体厚度及淋水、动载荷等其他因素对锚固效果的影响。讨论了锚杆锚固力试验研究中存在的问题及需进一步研究的方向。

关键词(KeyWords)： 锚杆;锚固力;试验

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 杜芳周;高新锋;高富强;

Email:

DOI:

参考文献(References)：

• [1]Christopher Mark.Design of roof bolt systems[C].Proceedings:New Technology For Coal Mine Roof Support.U.S.DHHS(NIOSH)Publication No.2000-151,2002.
• [2]陆士良,汤雷,杨新安.锚杆锚固力与锚固技术[M].北京:煤炭工业出版社,1998.
• [3]Bigby D.Coal Mine Roadway Support System Handbook[M].Rock Mechanics Technology Ltd for the Health and Safety Execu-tive,2004.
• [4]Signer SP.Field verification of load transfer mechanics of fully grou-ted roof bolts[R].Spokane,WA:U.S.Department of the Inte-rior,Bureau of Mines,RI9301,1990.
• [5]Fabjanczyk MW,Tarrant GC.Load transfer mechanisms in reinfor-cing tendons[C].Aziz NI,Peng SS:Proceedings of the 11thInternational Conference on Ground Control in Mining.Wollongong,New South Wales,Australia:University of Wollongong,1992.
• [6]Farmer,I W.Stress distribution around resin grouted rock anchor[J].International Journal of Rock Mechanics,Mining Scienceand Geomechanics Abstracts,1975(12):347-351.
• [7]Hawkes,J M and Evans,R H.Bond stresses in reinforced con-crete columns and beams[J].Journal of the Institute of StructuralEngineers,1951,24(10):323-327.
• [8]Nitzche,R N and Haas,C J.Installation induced stresses for roofbolts[J].International Journal of Rock Mechanics,Mining Sci-ence and Geomechanics Abstracts,1976(13):17-24.
• [9]Serbousek,MO,Signer,S P.Linear Load-Transfer Mechanics ofFully Grouted Roof Bolts[R].USA Dept of Interior,USBM-RI9135,1987.
• [10]PC Hagan.Variation in load transfer of a fully encapsulated rock-bolt[J/OL].Sydney:UNSW,2003[2007-12-23].http://www.mines.unsw.edu.au/Publications/publications_staff/Paper_Hagan_AGCM_2003.htm.
• [11]Radcliffe,D E and Stateham,R E.Stress Distribution AroundResin Grouted Bolts[R].USADept of Interior,USBMRI8440,1980.
• [12]Lewis Martin,Rimas Pakalnis,Doug Milne.Determination ofphysical properties of cable bolts in cement grout pull tests using in-strument King Wires[C].Canadian Institute of Mining AnnualConference,Vancouver,BC:2002.
• [13]荣冠,朱焕春,周创兵.螺纹钢与圆钢锚杆工作机理对比试验研究[J].岩石力学与工程学报,2004,23(3):469-475.
• [14]Kilica,Yasare,Atiscd.Effect of bar shape on the pull out capac-ity of fully grouted rockbolts[J].Tunnelling and UndergroundSpaceTechnology,2003(18):1-6.
• [15]Kilica,Yasare,Celikag.Effect of grout properties on the pull outload capacity of fully grouted rockbolt[J].Tunnelling and Under-groundSpaceTechnology,2002(17):355-362.
• [16]Franklin JA,Woodfield PR.Comparison of a polyester resin and amechanical rockbolt anchor[J].Trans Inst Min Metall(sectionA:Mining Industry),1971:A91-100.
• [17]Karabin GJ,Debevec WL.Comparative evaluation of conventionaland resin bolting systems[R].U.S.Department of the Interior,Mine Enforcement and Safety Administration,IR 1033,1976.
• [18]Cincilla WA.Determination of effective column lengths for resingrouted roof bolts[C].Peng SS:Proceedings of the Fifth Inter-national Conference on Ground Control in Mining.Morgantown,WV:West Virginia University,1986:6-14.
• [19]Rico GH,Orea RR,Mendoza RL.Implementation and evalua-tion of roof bolting in MICARE Mine II[C].Peng SS,ed.Pro-ceedings of the 16th International Conference on Ground Control inMining.Morgantown,WV:West Virginia University,1997:139-148.
• [20]L Mahony,P Hagan,B Hebblewhite,et.al.Development of alaboratory facility for testing shear performance of installed rock re-inforcement tendons[J/OL].Sydney:UNSW,2005[2007-12-25].http://www.mining.unsw.edu.au/Publications/publi-cations_staff/Paper_Morgantown_2005.pdf.
• [21]Bjurstrom,S.Shear strength of Hard Rock Joints Reinforced byGrouted Un-tensioned Bolts[C].Proceedings of the 3rd Inter-national Congress on Rock Mechanics.Denver Colorado.NationalAcademy of science,Washington:1974.
• [22]Spang,K.,Egger,P.Action of fully grouted bolts in jointedrock and factors of influence[J].Rock Mechanics and Rock En-gineering,1990(23):201-229.
• [23]温进涛,朱维申,李术才.锚索对结构面的锚固抗剪效应研究[J].岩石力学与工程学报,2003,22(10):1699-1703.
• [24]McHugh,E.,Signer,S.Roof bolt response to shear stress:la-boratory analysis[C].18th International Conference on GroundControl in Mining.Morgantown,WV,1999:232-238.
• [25]Ludvig,B.Shear Tests on Rock Bolts[C].Proceedings of theInternational Symposium on Rock Bolting.Abisko,1983:113-123.
• [26]Kharchafim,Grassellig,Eggerp.3D behaviour of bolted rockjoints:Experimental and numerical study[C].ROSSMANITH.Mechanics of Jointed and Faulted Rock,Rotterdam:Balkema,1998:299-304.
• [27]葛修润,刘建武.加锚节理面抗剪性能研究[J].岩土工程学报,1988(1):7-18.
• [28]Haas,C.J.Shear Resistance of Rock Bolts[J].Society of Min-ing Engineers,Transactions,1976(260):32-41.
• [29]Haas,C.J.Analysis of rock bolting to prevent shear movement infractured ground[J].Mining Engineering,1981,33(6):698-704.
• [30]朱焕春,吴海滨,赵海斌.反复张拉荷载作用下锚杆工作机理试验研究[J].岩土工程学报,1999(6):662-665.
• [31]朱焕春,荣冠.张拉荷载全长黏结锚杆工作机理试验研究[J].岩石力学与工程学报,2002,21(3):379-384.
• [32]Hibino,S,Motojima,M.Effects of Rock Bolting in JointyRocks[C].Proceedings of the International Symposium on WeakRock.Tokyo,1981:1057-1062.